Potassium Methyl Siliconate Requirements
How to use Potassium Methyl Siliconate :
1. Clean the surface of the substrate before use, and remove the water, dirt, and other attachments from the base area to be treated. If there are cracks, use putty or cement slurry to fill it up. The surface of the substrate should be flat and solid, and there should be no hollow drums. , Looseness, and other phenomena.
2. Before construction, slightly moisten the surface of the substrate for absorption.
3. Dilute to a concentration of 3% or lower when used. If you need to use a concentration higher than 3%, you must first perform experimental ve